MIB-200A

MIB-Seires MIB-200A

 


MIB-200A

 

Perfect solution for fusing of electric device and for welding of covered wire!

  • ◆MA-627A separate program unit allows easy setting and makes it easy to integrate into automated equipment.
  • ◆Seventeen levels of weld current frequency: 50 to 250Hz
  • ◆Constant current control (primary current) stabilizes weld current.
  • ◆Ideal AC welding with minimum dust and scorching to be caused.
  • ◆Two monitoring items: Current and voltage.
  • ◆AC inverter power supply with good thermal efficiency.

    AC inverter power supply with good thermal efficiency.

  • ◆Interrupt feature.

    Interrupt feature functions when a displacement amount reaches up to set level and stops current to obtain stable fusing. For this feature, it needs to be connected with a weld checker with a built-in displacement monitor and set a displacement amount of electrodes beforehand

    Interrupt feature

    Interrupt time chart

  • ◆Fusing of electrical parts and welding of coated wires.

    The MIB-200A is the ideal welding power supply for coated wire welding and electrical parts fusing. The teaching technique using an optional, MA-627A, has been employed for the setting method. The weld-time can be set by the unit of cycle.

    Fusing of electrical parts and welding of coated wires

    • * Fusing is a terminal processing method that vaporizes the coating of coated wire with heated pressing welding and bonds the wire core to the terminal.
ModelMIB-200A
Power requirements * 3-phase 220 / 240 / 380 / 400 / 440 / 480VAC + 10% - 15% 50/60Hz
Output frequency The welding current and frequency can be selected from the table below. (However, No.00 to 03 is supported only for 50Hz transformers.)
No. [Hz] No. [Hz] No. [Hz] No. [Hz] No. [Hz] No. [Hz]
0 50 3 59 6 71 9 91 12 125 15 200
1 53 4 63 7 77 10 100 13 143 16 250
2 56 5 67 8 83 11 111 14 167    
Control frequency 1kHz
Maximum output current 200A (8% duty cycle)
Control method Primary constant current peak value control
Welding schedule 15 schedules
Timer setting SQUEEZE DELAY 0000 - 9999ms
SQUEEZE 0000 - 9999ms
UP SLOPE / RISE 1 00.0 - 99.5cyc
RISE 2 -
WELD 1, 2 / CURR 1, 2 00.0 - 99.5cyc
COOL 00.0 - 99.5cyc
DOWN SLOPE 2 00.00 - 99.5cyc
HOLD 000 - 999ms
OFF 0000 - 9990 (10ms unit)
PULSATION 1 - 9
Heat setting / Power supply setting 0.10 - 9.99kA
Cooling method Air cooling
Mass 15kg
  • * Set at the factory

The specification and external design are subject to change without notice.

 

◆MIB-200A

MIB-200A

ModelMT-510ACMT-520ACMT-25
Rated capacity 1.0kVA 3.2kVA 11.1kVA
Rated primary voltage 200VAC +/-10%
Rated secondary voltage 1.2/ 1.8/ 2.5/ 3.5V 2.5/ 3.2/ 4.0/ 5.0V 2.6/ 4.0V (paralell)
5.3/ 8.0V (straight)
Input frequency 50/60Hz
Maximum output current 1600A 3700A 8000A
Duty factor (@100ms) 1.5% or below
Cooling method Air cooling Water cooling
Dimensions and Mass 193W x 291D x 176Hmm / 20kg 182W x 358D x 198Hmm / 35kg 180W x 370D x 240Hmm / 60kg

 

Back